The grout in certain parts of your home may have become a mess. These may have become difficult to clean as well. You may want to know how to redo grout to fix this problem. You have a lot of questions about this, including what to use and other stuff. In this article, we shall learn to do this.

Before regrouting, you need to know remove old grout. In this procedure, you can make use of carbide tipped scraper tool or a fine tipped screwdriver. You can find carbide tipped scrapers at most hardware stores and these are really cheap. You have to be really careful with this as this can scratch glazed tile surface, though. You just need to apply gentle yet firm pressure when using the scraper. It may take several strokes before you can remove a large portion of your old grout. Just go on until the unglazed edges of the tile are exposed.

It is time to redo grout once you have completed removing the old one. Professionals would suggest making use of dry set grout with latex additives or cement grout. These types can mix well with water. These also offer optimum bonding capabilities. These are also less absorptive, compared with regular cement grouts. Applying this is also simple. You just need a round edged synthetic grout sponge and a hard rubber grout float. You would also need up to three buckets of tap water.


Now, we shall learn how to redo grout. First, add water to the dry grout mixture. Stir this until the mixture becomes creamy. The result should be firm. With the use of a rubber float, the grout is troweled onto the tiles. It is important to apply pressure in squeezing the grout in the grooves in between tiles. Excess grout is removed when you pull the rubber float across the tile.

To remove grout from the face of the tile, you should use a sponge. Squeeze out the water from your sponge first. The sponge should be rubbed lightly in a circular manner on the grouted spaces. It is also important to rinse the sponge in a frequent manner. But remember to squeeze all water from your sponge every time you do this. After focusing on the tiles, concentrate on the grout lines. Repeat this process until the grout lines are already smoothened. It is important to avoid using too much water to avoid crumbling later on. This is also applicable for your patio alternatives.