Framing Pictures: the most common questions

0 Comments | Rating: 0 | |

Are you looking to frame a favourite photograph or piece of artwork? If it is such an important piece, you will want to get the framing right. Below you will find the top 3 questions people ask when it comes to framing a picture. By knowing the answer to these questions, you could save yourself some headaches when it comes to doing your own framing.

Question 1: Should I use clear or non-glare acrylic?

You should use non-glare acrylic when the picture is to be displayed on a wall opposite a window that provides large amounts of light or in a room that has lights on the ceiling. If the acrylic is reflected, any light that comes from above and behind the viewer will be directed straight back at them, making it difficult to see the picture.

However, there are times when you shouldn't use non-glare acrylic for glass picture frames. The most obvious is when you want a viewer to see the fine details of the picture, such as when you have small writing on display. This is because non-glare acrylic diffuses light and often makes small details hard to make out. You also should use this type of glazing when you have more than two mats because of the extra space between the acrylic and picture will make if difficult to see the detail.

Question 2: When ordering or making a custom frame, how should I measure the picture?

When you are having a custom made frame, you will need to measure the width and height of the outside dimensions. This includes the mat. These dimensions will be used for the frame, backing board and acrylic. With a stretched canvas, you will need to measure from the wrapped corner to the next.

Question 3: When Do I Use FoamCore vs Corrugated backings?

The two most common backings are FoamCore and Corrugated. These backings are used under different circumstances.

FoamCore, which is the most expensive backing, is designed to slow down any damage from acid or lignans. Therefore, if you the picture is important or valuable then you should use this type of backing. FoamCore is also white, which is important if you have a picture with is see through or semi-see through.

Corrugated backing is cheaper and used for pictures that aren't as valuable or important. They are a good option for cheap picture frames. This backing is also darker in color and shouldn't be used with translucence pictures.