Heat Pump Prices Review

miketongos | Nov 21, 2011 |

0 Comments | Rating: 0

Still undecided whether or not to buy that heat pump you’ve been eyeing for months online? Then, worry not. With the wide selection of heat pump designs and models posted on the internet, you’ve got better chances of scoring the best product suitable for your need. You may have probably read a couple of heat pump reviews and got some ideas as to which product is best to purchase. But if the budget is what makes you undecided, then read on.

What are heat pumps?

Heat pumps are devices used to transfer heat from one area to another. In other words, heat pumps can cool down your summer and warm up your winter, depending on how you prefer it. There are two types of heat pumps. These are air-source heat pumps and geothermal heat pumps. Air-source heat pumps are used to capture and move heat between the indoors and the outdoors. The geothermal heat pump, on the other hand, transfer heat between the indoors as well as the relatively steady temperature beneath the earth’s exterior. Thus, geothermal heat pump is also known as ground source or water source pumps. Aside from using heat pump to keep your home warm, large commercial buildings also use geothermal heat pump as an environmentally responsible means of conditioning the temperature.

Some features that can affect the costs of heat pumps:

The heat pump prices may vary depending on your chosen brand and model. The cost of ground-source heat pumps may be about $5000-$10000. Of course, this price depends on certain aspects such as the water capacity, design, SEER (Seasonal Energy Efficiency Ratio), and installation charges. If you want to buy a heat pump for your personal use, then opt for a 2-ton water capacity as this is ideal for a household with five members. A 5-ton water capacity, however, is good enough if you’re keeping a relatively small business. SEER, on the other hand, is determined by the Air, Conditioning, Heating, and Refrigeration Institute (ARI). Every appliance covered by ARI such as air conditioner, refrigerator, and furnace go under the standard ARI 210/240. Higher SEER pumps can be a little expensive but experts believe that SEER 13 can be enough to supply just the right heat so you need not opt for heat pumps with higher values.

Your choice of a heat pump design also matters. The most common type is the ground-source heat pump which is quite noiseless as it does not include any external fan with it. With the right choice of brand and proper care of the package unit, this type can last for around 40 years! You may also want to consider a ductless heat pump especially if you are running a commercial building. This duct system has cooling lines to link internal and external units. These cooling lines or refrigerants disperse so it can dig out and move heat to your internal unit provided that the external temperature is above 17F. This ductwork design is a sophisticated process which has been tried and tested for over 25 years. But if you want long-term energy savings and be a little economical, then you may opt for the geothermal heat pump as this can sure slash away 20%-50% of your electric bills. In comparison to other heat pump designs, the geothermal heat pumps have the ability to acquire a stable energy source from the ground regardless of the available sources just above the surface. Although this type may hurt your pocket a little (it’s more expensive compared to other designs), it’s sure to be a good investment once purchased.

Another important thing that can affect heat pump costs is the installation fee. You need to remember that a trained professional must be hired to do the installation for you. If you are planning to install a geothermal heat pump, then be ready to shell out at least $10000-$25000. This will depend on the various aspects of your location such as the soil condition, and the size of the underground tubes. Installing a simple air-source heat pump, however, may cost you $500-$1500. But for a whole house system with an existing ductwork design needing an air-source heat pump installation, $2000-$5000 may be good enough. For homes without existing ductwork design, the cost may go about $4500-$6000 subject to the number of zoning systems. You also need to check for the installation kit that always comes along with your purchase. Since investing on a heat pump may take a huge part of your savings, it is always advisable to compare the pros and cons of each type and get a hold of every price advantage that comes along your search for the best model and design.

There can also be some additional costs when you take on an electrician to enhance your electrical panel. This is applicable especially to consumers with older houses. The cost may go around $1300-$3000.

Some tips from other people :

According to the Department of Energy, a heat pump is in a good condition if it warms the house gradually and sustains an even temperature unlike the forced-air furnace where discharges of hot air are observed from time to time. Accordingly, they have released a list of tips on the advanced features of heat pumps so that its performance can be enhanced. You can also check on the internet the checklist for getting a legitimate heat pump contractor so that you can be guaranteed that your heat pump will work efficiently. Other things that you need to look out for when buying a heat pump are its warranty period, the service the dealer will provide, and the discounts that may come along with it.

So, now that you have weighed your pump price options, log in to your trusted online shop and start ordering a heat pump that fits your need!