When installing a residential steel water tank, homeowners will first need to lay a firm foundation of sand. This foundation will give the water tank stability and absorb residual water if it leaks out. Instead of using more expensive materials like concrete or gravel, sand can work equally as well while saving the great amount of money. The good news for those looking to do it themselves is that a sand pad is also easy to complete. With just a few hours of work, a homeowner can create a sand pad for their water tank. This article will outline instructions for homeowners looking to install their own sand pad for a water tank.

1. Lay a Plan

The first step to successfully creating a sand pad is to ensure that it is going to be created correctly. Homeowners that want to install one of these pads should ensure that they are placing it in the right location within their yard. Individuals should also work with a professional or expert in the field to make sure that the land is appropriate for a sand pad. Areas that are too low or high might not be appropriate for an effective foundation for residential water tanks.

2. Gather Supplies

These foundations are relatively simple to construct, but a few supplies may be needed in order to complete them. For one, homeowners will need digging tools like a shovel or excavation equipment in order to make the hole. Something to carry the sand like a wheelbarrow will also be required to get it to its final destination. Individuals will also need to rent a tamper in order to pack down the sand in a way that ensures that the support structure will hold.

3. Dig a Hole

Following the specifications recommended by the steel water tank's manufacturer, homeowners should begin digging a large hole for the foundation. For 200 gallon tank, a foundation about 6' x 6' is generally considered appropriate, though it may not have to be this big. This step can be rather labor-intensive, so those looking to dig this area should ask friends or family for assistance.

4. Add Sand

The final step is to add the sand to the hole. Individuals should visit their local sand supplier to purchase fine sand that is appropriate for this type of foundation. Use the wheelbarrow to transport the sand to the hole as efficiently as possible. Individuals might also consider getting a dump truck to make this process quicker as sand can be delivered directly to its destination in this way.