Login
Password

Forgot your password?

How to Clean Leather Boots

By Edited Jun 2, 2014 1 1

Leather Boots

So you finally bought those expensive leather boots that you were looking at, but now that you have worn them a few times, they are starting to look a little dirty. Taking care of your boots is more than just keeping them clean, a well maintained boot is essential to making them a long-lasting member of your wardrobe. Even with older boots, proper cleaning and polishing can make them look like you just bought them yesterday. Note: You can use this guide for leather shoes as well.

Things you will need:

  • soft brush
  • clean rags
  • buffing brush, or shammy
  • shoe cream or polish
  • leather conditioner
  • all-weather spray or cream

It is possible to substitute most of the materials used to apply the conditioners and creams with an old soft T-shirt, however, there are full cleaning kits available that include everything you will need.

 

1.  Brush off any dirt or other residue

Shoe Brush

Take a soft brush and remove any dirt of residue from the boot. A soft brush will prevent scratches from forming. For resistant areas, use a damp cloth with some soap. if you have salt stains, mix half and half water and vinegar and dab the area with a cloth, then use water to wipe clean.

2.  Apply a conditioner

Using a soft sponge, apply a leather conditioner to the boot. This is important to keep the leather from drying out. Allow at least twenty minutes for the conditioner to soak into the boot, however an hour is recommended.

3.  Clean off any excess conditioner

Use a soft brush or rag to clean off any of the excess conditioner that was not absorbed into the boots.

3.  Apply a polish or cream

After applying the conditioner, evenly add a layer of polish or shoe cream to the boots using a soft applicator or rag. The choice between shoe cream and shoe polish is up to you. Shoe cream penetrates deeper into the leather than polish, however, polish will give your boots a greater shine. Ensure that you are using the proper color on your boots, which should be tested on a small inconspicuous area first. Use a Q-Tip to get into hard to reach places, and around the seams. Once the boots are polished, give the coat roughly 15 minutes to dry. Depending on the condition of the shoes, a second coat might be recommended. 

4.  Clean off any excess polish

Using your soft brush, or a rag, clean off any of the excess polish or cream that was not absorbed into the boots.

Shoe Sponge
5.  Buff to a glossy shine

Use a buffer brush, a clean soft rag, or a shammy to buff. Rub the boot in a continuous circular motion until the boot begins to shine.

6.  Apply weather resistant cream or spray.

Finally, once the boots are fully cleaned, conditioned, polished, and buffed to a shine, they are ready to wear. To add another layer of protection, however, an all-weather cream or spray should be applied about once a week. Using a spray or cream is simple, and can help keep water and other elements from soaking in and ruining the leather. 


Congratulations! Your boots are clean, shiny, renewed, and looking brand new. Keeping a consistent cleaning schedule will help keep your boots in perfect condition. Cleaning regularly is important to prolonging your boot's lifespan. Good luck, and enjoy your new boots!

Cleaning kits

 

Advertisement
Advertisement

Comments

Mar 3, 2014 6:58pm
relevantinfo
This is practical advice for a look that will never go out of style!
Add a new comment - No HTML
You must be logged in and verified to post a comment. Please log in or sign up to comment.

Explore InfoBarrel

Auto Business & Money Entertainment Environment Health History Home & Garden InfoBarrel University Lifestyle Sports Technology Travel & Places
© Copyright 2008 - 2016 by Hinzie Media Inc. Terms of Service Privacy Policy XML Sitemap

Follow IB Lifestyle