Only freshlKitchenAid GMA Grain Mill Attachmenty milled grains can provide your family and you with the wholesome goodness you insist on in the pastas, baked goods, and cereals. The KitchenAid GMA Grain Mill Attachment for Stand Mixers is made for graining low moisture grains like wheat, barley, rice, corn, rye, oats or other cereal grains with a hard vitreous endosperm from fine to coarse. When you bake with home ground flour you will get all of the good you can possibly get from a grain. Home ground fresh flour is much better for you than store-bought flour. Also, fresh ground flour is filled with healthy enzymes. It is a bit coarse, but works great. And you will never want to go store bought bread ever again.

Assembling these KitchenAid mixer attachments is easy. Simply install the power shaft into the body of the GMA Grain Mill and than mount the face plate onto the front of the attachment. You will need to turn the attachment knob two or three times counterclockwise to assure that the Grain Mill fits against the housing of the stand mixer. Now turn the face plate screws into the place. Than install the fully assembled KitchenAid Grain Mill into the appliance's square attachment hub socket lining up the pin on the attachment with the knob on the stand mixer. Insert the attachment with a in the alignment hole in the hub. Than tighten the thumb screw. When you are ready to use this KitchenAid mixer attachment you can change the adjustment of the grain by turning the adjustment knob while the machine is running.

You should use speed ten, i.e. you should use the highest speed possible, which depends on your KitchenAid Mixer. Best of all, you can grain up to 10 cups of grain into flour at a time before you will need to give the stand mixer a rest.

Home ground flour bread is very popular and making it ensures the freshest possible flour packed full of all the minerals and vitamins nature intended. Which you get is the whole grain, all of the parts of the berry and nothing is removed. If you really want finer grained you can always grain the flour again.

Disassembling these KitchenAid mixer attachments is also simple. Just remove it from the stand mixer, unscrew the front plate and remove the cutting head. You can brush any lose grain from the head with the small brush included in the kit. And you can also use a wooden toothpick or thin wooden skewer to remove any of the small grains from the grooves. Also - and this is very important - these KitchenAid mixer attachments should never be washed in a dishwasher, so it must be cleaned by hand. It has many small parts that are not dishwasher-safe. The Grain Mill does not have to be completely disassembled after each use and thoroughly cleaned.

KitchenAid takes pride in developing and manufacturing high end kitchen appliances. These great and useful machines are top quality and very user friendly.

The KitchenAid RVSA Slicer/Shredder Attachment for Stand Mixers has a feature that makes it easier to add and remove the cones from the attachment shaft. It is these little things that show how much effort this company puts into their kitchen tools. You can use these KitchenAid mixer attachments to shred onions, potatoes, chocolate or even nuts. Also, you can slice vegetables for munching and cooking.

Using this Slicer/Shredder attachment is simple. Simply remove the attachment hub by loosening the thumb screw. Than install the housing of the attachment. You should use the attachment's housing as leverage to tighten the cone onto the shaft. With the cone in one hand and shaft in the other hand install the tabs into the little slots at the back of the cone. Now simply locate the square notch at the twelve o'clock position on the housing and insert the shaft. And you are ready to start using this really great attachment. To remove the cone you should do the same thing. Simply install the end of the shaft into the square notch and rotate it to the left to loosen. This should make the whole process much simpler.

I highly recommend these KitchenAid mixer attachments.