"An error occurred during the start operation. 80010514″

If this is the error message that you are experiencing on your PS3 console then you have come to the right page. In this article you are going to learn what causes the PS3 error 80010514, as well as what you need to do to fix it. You don't need to waste your time searching through screeds of unreliable information about this frustrating PS3 error; keep reading to learn how to get rid of the 80010514 code quickly and easily.

1. What Causes The 80010514 Error On The PS3?

There are two main causes of this error on the PS3 platform. These are either a faulty sector of the internal hard drive (basically a small piece of hard drive space that your PS3 is attempting to write to is not functioning correctly) or a faulty/incorrect installation of software/firmware.

The error tends to occur when you are playing games, not watching DVDs and movies as these do not require the use of your PS3's hard drive. Game function due to an inability to read and then execute the disk is the main symptom of the PS3 error 80010514.

2. What Is Sony's Official Line On The Error?

According to Sony the 80010514 error is a very infrequently experienced problem, and is not really worth worrying about. Sony state that usually all you need to do to fix the error is simply reset your console; while this may provide a temporary reprieve from the problem it will not prevent it recurring again in the future as it does not address the root causes of it.

3. What Do You Need To Do In Order To Prevent The PS3 Error 80010514?

If you have not yet experienced this dreaded error on your console then there are a few simple steps you can take to massively reduce the chance of your PS3 developing it:

Firstly, you should throughly check and follow ALL instructions when updating your PS3's firmware and software. Regardless of how many times you may have carried out similar updates in the past, you still must correctly follow all instructions to negate the risk of a faulty installation, and thus reduce the chance of developing the 80010514 error on your PS3.

Secondly, ensure that you have stable and reliable wireless connection to prevent a disruption during firmware/software download that could then go on to cause a faulty update. Try to locate your PS3 as close to your wireless access point as possible, and when updating firmware/software disconnect as many other devices from the network as possible in order to reduce the risk of "contaminating" the connection.

Thirdly, avoid installing any unofficial firmwares or softwares on your console, as it is extremely difficult to roll-back a faulty installation, and you cannot vouch for the quality of unofficial updates.

4.How Can You Fix The PS3 Error 80010514?

If your console is already experiencing this problem, then you have two main options to fix it.

Your first port of call is getting Sony themselves to either fix the cause of the error, or simply replace the faulty PS3 unit itself. You will have to contact Sony in order to be able to do this. However, you will be without a PS3 console for up to 6 weeks, and you will also have to pay around $150 to get your console fixed, which is quite large chunk of money.

You would be far better off to use a PS3 repair guide in order to be able to fix your console and get back to gaming again. A video repair guide will show you step-by-step how to fix the 80010514 code permanently on your PS3 console, by rolling back and removing corrupted firmware and software, as well as overcoming hard drive problems.

By following the video instructions in a PS3 repair guide you should be able to fix your console in under two hours, and with very little difficulty. As long as you can follow basic video instructions you will be gaming again before you know it.