Taking Care of Your Antique Clocks: the Mantle Clock
There are plenty of ways to provide proper care to an antique mantle clock. This is critical to keep its pristine and optimum condition. Caring for old mantle clocks is done the same way as with other types of antique clocks (i.e. antique wall clock, and antique bracket clock). Regular inspection and cleaning will greatly help to ascertain that your antique clocks will continue to function properly. If you are versed in cleaning the internal antique clock parts, you may choose to dust it off once in a while. But remember that the internal workings of old clocks are quite sensitive so be sure use extreme care.
When you notice that the antique clock is out of beat, adjust it immediately. That being said, you have to pay careful attention to the sound of your old mantle clock. If you heard a limping tick, then that might indicate a mechanical problem. However, there are instances that the clock's limping tick is caused by its placement to an uneven surface. If that is the case, you have to find a leveled surface to place the clock. But if the problem persists, you have to seek professional help from an antique clock expert.
Most old mantle clocks need to be wounded every 5-6 days. This because majority of old mantle clocks are 8-day clocks. But unlike the 8-day antique grandfather clock, they are much smaller. It is important that you wind the clock regularly to avoid a sluggish performance. To wind an old mantle clock, you have to smoothly turn its arbor until you have fully wounded its springs. You may also elect to set the time by moving the clock's hands but be sure to do it properly. If you have a chiming mantle clock, you have to wait for the chime to finish before you start moving the hour hand.
Be sure to follow the above-mentioned tips to preserve the quality and existing condition of not only an old mantle clock but as well as other types of antique clocks.



Yes
No
Flag




Comments
Add a new comment - No HTMLYou must be logged in and verified to post a comment. Please log in or sign up to comment.