Toilet Tank Replacement
While most accidents are unavoidable and will cause some inconvenience for you, your capacity for toilet tank replacement can let you fix your toilet and put it back together in a jiffy, undoing whatever accident that contributed to its brokenness. Toilet tank replacement should be done when your toilet's tank is obstructed or damaged somehow, especially when the tank is broken.
Toilet tank replacement sounds like a dirty job, sure, but you can do it without the risk of mess or even injury when done properly and with the right tools.
What's up with toilet tank replacement? Why should I resort to that in the first place?
It is important that you replace the tank you have right away if it is cracked or if it leaks and has a faulty valve or two. This cannot be put off until later, as problems like these get worse the longer they're left untreated, and you'll be the only one who's going to be inconvenienced in dire situations. For instance, imagine trying to answer nature's call while your toilet tank is leaking.
Sure, if you have another bathroom where you are living, it's not that much of an issue. But more likely than not, you have only one. And broken or malfunctioning tanks should be taken care of straight away, either by calling in a plumber or handyman or doing it yourself.
Toilet tank replacement â€“ what to do
Shut off the water supply that's connected to the toilet by turning the little stop valve, which you'll find under the toilet tank's left side. Turn this valve's handle all the way to the right. If there's any water left in the toilet, flush it to relieve any remaining water pressure and to clear the tank of water. Then disconnect the water supply line from the tank with pliers.
If there are any, remove any loose, broken or chipped pieces of the toilet tank inside the toilet or on the floor with work gloves on. You can vacuum if the floor is dry, but if wet, utilize a wet-dry shop vacuum.
Now comes the hard part, removing the broken toilet tank. With an adjustable wrench, unscrew the tank-to-bowl bolts from under the toilet. You will find that two or three brass bolts can be located from inside the tank to the underside of the toilet bowl. If a bolt turns when you try to remove the nut that is holding it, use a screwdriver to hold the top of the bolt. With extreme caution, lift the malfunctioning toilet tank off the bowl, and dispose of it properly.
Next, install your brand-new toilet tank replacement. On the bottom side of it, attach a new tank-to-bowl gasket and a soft donut-shaped seal to the flush valve which you'll find on the bottom. Position your new toilet tank onto the bowl and insert and secure new tank-to-bowl bolts and seals. You should replace every bolts, washers, gaskets and nuts you see.
Lastly, reconnect the water supply line you severed back to the fill valve. Again, to test for leaks, turn the water on. If the toilet tank does not leak or make any awkward noises, then congratulations, you are successful in toilet tank replacement.
More toilet tank replacement tips
You can buy a toilet tank replacement from hardware and household stores. You may also buy them online, with thefind.com selling toilet tank replacement parts.
As mentioned, use heavy work gloves when working with broken toilet tanks. The importance of safety cannot be stressed enough. If you were to get injured while repairing your toilet tank, you would end up having a bigger problem than you already do.
While preparing it for toilet tank replacement, always set the new tank on a soft surface. Otherwise, it will be damaged, and a toilet tank replacement with chips or scratches, both visible or not just won't do. Your toilet tank replacement will be rendered pointless if the new tank has defects.
While fastening the tank bolts, make sure to apply ample force. If you apply too much, you might overtighten them, breaking the new tank in the process.
Lastly, and perhaps most importantly, don't be afraid to ask for professional help if you think you don't have the time for toilet tank replacement, or if you simply don't think you can do it by yourself. Hiring a workman might cost a bit more, but it's worth it, as they usually ensure efficiency and clean handiwork, giving you exactly what you're paying for.
Broken toilet tanks can be both annoying or dangerous, so keep them up and running with toilet tank replacement.