Mold Growth

Mold spores can be found everywhere. Mold growth is most prolific in warm, moist weather, but high indoor moisture levels and poor ventilation can lead to mold growth any season. In lowering the opportunity of mold, provide sufficient air flow and lower moisture levels in mold-prone areas, for example cellars and storage areas.

Avoid storing products directly against walls in potentially moist areas, which limits air flow and trap moisture against surfaces. Also consider placing boxes and canisters on blocks or pallets to permit ventilation.

If you are leaving for an extended time period, keep in mind that a closed-up house usually produces an atmosphere where air changes occur very gradually. Water vapor present can condense about the cooler surfaces and permit mold to develop because the temperature gets warm.

Frequent air change can help control moisture levels and moisture and mold spores from accumulating. When outside weather conditions are appropriate, promote ventilation and air changes by utilizing air circulating fans and/or opening the home windows slightly. Dehumidifiers might help remove moisture in the air, but realize mold spores will stay. Problems may re-occur when moist conditions return.

When water leaks or spills occur inside - act rapidly. If wet or moist materials are removed or permitted to dry up within 24-48 hrs following a leak or spill happens, generally mold won't grow.

Since prevention is definitely the easiest method to keep a house fit, the following advice can steer clear of the potential health insurance and financial burdens connected with mold.

Mold Tips

  • Repair or reseal roof flashings when broken or worn.
  • Clean gutters regularly.
  • Make certain the floor slopes from your house foundation.
  • Pipe downspout water discharge points from the foundation.
  • Keep ac drip pans neat and the drain lines clear.
  • Check the health of all water piping, fixtures, and fittings periodically.
  • Vent home appliances that produce moisture, for example clothes, hairdryers towards the outdoors.
  • Keep indoor humidity low. Use air conditioning units and/or p-humidifiers if needed.
  • Use exhaust fans or open home windows whenever taking a shower or cooking for longer periods.
  • Increase ventilation or air movement by opening doorways and/or home windows, when practical.
  • Cover cold surfaces, for example cold water pipes, with insulation.
  • Give a moisture barrier over grime flooring in crawlspaces.
  • Make certain attics and crawlspaces are venting correctly.

If you notice condensation or moisture receiving full payment for surfaces, act rapidly to dry the wet surface and lower the moisture/water source.